Important notice:

Xbox®, Xbox 360® registered trademarks are the property of Microsoft Corporation. Use the case at your own risk, the Xbox360 warranty is voided once you break the seals to open up the case. The case's warranty will only cover the chassis itself, and will not include the Xbox 360 or any of its associated components. There are many web pages and videos showing how to disassemble / open up your Xbox®, use it at your own risk!

This manual only shows how to assemble it in your new case.

Whats in the box:

Not included:

(a working device and a set of 120mm fans of your choice)

1.

Mount the fans. The fans in the top cover should be mounted to blow air into the case.

2.

Mount airguide and hdd-box in backplate.

3.

Place the motherboard on the bottomplate.

4.

Mount DVD, HDD and the backplate.

5.

Plug in the "light ring card"

6.

Prepare the front plate by inserting buttons and light pipes.

7.

Mount the front plate.

8.

Fasten "light ring card"

9.

Connect the fans. Depenting on what fans you're using you can connect them to the

motherboard or to a separate power feed. Do not try to run the device without fans,

it will RROD in seconds.

10.

Mount the top plate.

11.

Power up and eject the DVD. Turn it off again. Mount the DVD front cover.

Close the tray by hand to ensure that it lines up nicely.

12.

Fasten the top cover.

13.

Power up and and play!

Store the orginal components in a secure place. You never know if you want to put it back in there...